Automotive Repair Guide: Replacing Front Brake Pads on a Ford Mustang 2015 Model
Over time, the brake pads on your Ford Mustang 2015 model can wear down and affect your vehicle's braking performance. It's crucial to replace these brake pads to maintain your car's safety on the road. Here's a step-by-step guide to help you perform this repair yourself.
Tools You Will Need:
- Tire iron
- Car jack
- Socket Set
- Brake Pad Spreaders
- New Brake Pads
Steps to Follow:
Step 1: Loosen the Lug Nuts
Use the tire iron to loosen the lug nuts on the tire that you are going to replace the brake pads on. It's easier to loosen the lug nuts before you lift the car with the jack.
Step 2: Lift the Car
Place the jack under the car frame near the tire that you are going to remove. Pump the jack handle until the tire is lifted off the ground.
Step 3: Remove the Tire
Now that the tire is off the ground, use the tire iron to remove the lug nuts completely, and take off the tire.
Step 4: Remove the Brake Caliper
Use the socket set to unscrew the bolts holding the brake caliper in place. Once removed, slide the brake caliper off the brake disc.
Step 5: Replace the Brake Pads
Remove the old brake pads from the brake caliper. Use the brake pad spreader to push back the brake piston. Slide the new brake pads into the slots where the old pads were. Make sure the new pads are facing the right way.
Step 6: Reinstall the Brake Caliper and Tire
Slide the brake caliper back over the brake disc, and screw it back into place using the socket set. After this, put the tire back on and hand tighten the lug nuts. Once the tire is on, lower the car using the jack and then use the tire iron to tighten the lug nuts completely.
Conclusion:
By following these steps, you've successfully replaced the front brake pads on your Ford Mustang 2015 model. It's a relatively simple process that can save you a trip to the mechanic. Remember to stay cautious and take your time while doing this, safety should always come first.